Loading ...
Loading ...
Loading ...
Operating the appliance en
9
Saturation display
When the metal grease filters or the air recirculation
filter are saturated after the appliance has been
switched off, the corresponding symbols flash and a
repeated signal tone sounds:
■ Metal grease filter: LED 1 flashes
■ Air recirculation filter: LED 2 flashes
■ Metal grease filter and air recirculation filter: LEDs
1 and 2 flash
If you have not yet done so, the metal grease filters
should now be cleaned or the air recirculation filter
replaced. ~ "Cleaning and maintenance" on page 13
The saturation indicators can be reset while they are
flashing. To do this, press the y button.
Switching over to circulating-air mode
For circulating-air mode, the electronic controller must
be switched over accordingly.
1. When the appliance is switched off, press and hold
the # and y buttons for approx. 3 seconds.
The LED for the currently active filter setting lights up
on the appliance.
2. Press the @ button/A button until LED 2 for
circulating-air mode (filter cannot be regenerated)
lights up on the appliance.
3. Press the @ button/ A button until LED 3 for
circulating-air mode (filter can be regenerated) lights
up on the appliance.
4. Press the @ button/A button until LED 1 on the
appliance for the electronic controller is switched
back to operation without air recirculation filter.
5. Press and hold the # and y buttons for approx.
3 seconds to save the setting or wait for approx.
10 seconds until the setting is automatically saved.
A signal tone will sound.
Note: Press the # button to cancel the setting.
Lighting
The lighting can be switched on and off independently
of the fan.
Press the B button.
Setting the brightness
Press and hold the x or } button until the required
brightness is reached.
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Button tone
Switching on or off
Note: Only button tones can be switched on and off.
Signal tones on the appliance cannot be switched off.
1. When the appliance is switched off, press and hold
the # and A buttons for approx. 3 seconds.
The LED in the currently selected setting lights up.
2. Press the @ or A button to change the setting.
The button tones are switched on if LED 1 lights up
on the appliance.
The button tones are switched off if LED 2 lights up
on the appliance.
3. Press and hold the # and A buttons for approx.
3 seconds to save the setting or wait for approx.
10 seconds until the setting is automatically saved.
A signal tone will sound.
Note: Press the # button to cancel the setting.
Loading ...
Loading ...
Loading ...