Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
14
Top Control Dishwasher
Cleaning the door and tub gaskets
Clean the door gasket with a damp cloth to remove food particles regularly.
The inside of the dishwasher is self-cleaning under normal use. If needed, the tub gasket can be cleaned with a damp cloth.
Use a brush to clean the opening in the end of the gasket.
Cleaning the air gap
If there is an air gap installed with your dishwasher, make sure that it is clean so the dishwasher will drain properly. The air
gap is not part of your dishwasher.
Before you clean the air gap, turn off the dishwasher, then remove the plastic air gap cover and clean with a toothpick.
Protecting your dishwasher for long periods of unuse
Your dishwasher should be protected from freezing if you plan to leave it for extended periods in an unheated place. Have
a qualified person do the following:
To disconnect service:
1 Turn off the electrical power to the dishwasher at the supply source by removing fuses or tripping the circuit breaker.
2 Turn off the water supply.
3 Place a pan under the inlet valve, then disconnect the water line from the inlet valve and drain it into a pan.
4 Disconnect the drain line from the pump and drain the water into a pan.
To restore service:
1 Reconnect the water, drain, and electrical power.
2 Turn on the water and electrical power supply.
3 Fill the detergent cup and the rinse aid cup and run the dishwasher through a heated-wash cycle.
4 Check all connections to make sure that they do not leak.
NS-DWH1SS9_WH9_17-0938_User MAN_V1_ENG.fm Page 14 Wednesday, January 24, 2018 11:02 AM
Loading ...
Loading ...
Loading ...