Loading ...
Loading ...
Loading ...
Switching on/off manually
Press button briefly:
– The menu for the Intelligent
Safety system is displayed. The
systems are individually
switched off according to their
respective settings.
– LED lights up orange or goes out respec-
tive to their individual settings.
Adjust the settings as needed. The individ-
ual settings are stored for the driver profile
currently in use.
Press button again:
– All Intelligent Safety systems
are switched on.
– The LED lights up green.
Hold down button:
– All Intelligent Safety systems
are switched off.
– The LED goes out.
Warning with braking function
Display
If a collision with a detected person is im-
minent, a warning symbol appears on the
instrument cluster and in the Head-up Dis-
play.
The red symbol is displayed and a
signal sounds.
Intervene immediately by braking or
make an evasive maneuver.
Braking intervention
The warning prompts the driver to inter-
vene. During a warning, the maximum brak-
ing force is used. In order to activate the
Brake Assistant function, you must apply
the brakes quickly and forcefully. If there is
a risk of collision, the system may assist
with braking. When the vehicle is traveling
at a low speed, the vehicle may come to a
complete stop.
The driver may interrupt the braking inter-
vention function by stepping on the acceler-
ator pedal or by actively moving the steer-
ing wheel.
The system’s ability to detect objects may
be limited in some circumstances. Refer to
the information in this Owner’s Manual re-
garding the limitations of the system and
actively intervene as warranted.
System limits
Safety information
Warning
The system is designed to operate in cer-
tain conditions and circumstances. Due to
conditions or other factors, the system
may not respond. There may be a risk of
accident or risk of damage to property. Ac-
tively intervene as warranted. Refer to the
information in this Owner’s Manual re-
garding the scope of the system’s opera-
tion and limitations.
Detection range
The detection potential of the camera is lim-
ited.
Thus, a warning might not be issued or be
issued late.
The following situations may not be de-
tected, for example:
– Partially covered pedestrians.
– Pedestrians that are not detected as
such because of the viewing angle or
contour.
– Pedestrians outside of the detection
range.
Seite 179
Safety CONTROLS
179
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...