Reattach suction cup
when notification pops
up (3 months).
You can also check
the removal procedure
with a QR code.
You can also access
removal information
from the QR code.
“Click”
PULLPULL
STEP 1 STEP 2
A
Tuck removal tab inside
B
Attach the cover
PNQW5976ZA PP0620KT0
WARNINGS
Failure to observe WARNINGS could result in damage
to the product and any of its room exteriors.
●
Please note: Failure to properly attach the suction cup in
accordance to the quick start guide may result in the
product detaching from the window. The camera should
be reattached regularly to avoid premature detachments
or we recommend using the double-sided tape to secure
the camera to the window.
●
The double-sided tape has an average bonding life of 2
years and requires replacement of the tape to ensure the
proper attachment surface connection.
●
The wire holding clip should be attached on a surface that
has been tested to avoid possible damage to paint;
plaster walls; wall paper etc.
●
The enclosed double-sided tapes are designed to be used
on standard window glass surfaces. If your window
contains materials such as tinted film, we recommend you
consult with the window manufacturer prior to use to
avoid window damage.
FOLLOW THESE STEPS
What’s in the box
AC adaptor
Camera (window side)
Cover
Double-sided tape (2 sets)
Cable clips
Let’s get started!
Quick Start Guide
●
The window is an image.
2. Insert a microSD card
･
microSD cards are not included.
7. Attach the cover 8. Manage the power
cable with the cable
clips as necessary
8. Manage the power
cable with the cable
clips as necessary
(Included)
Page 1
1. Clean the window
before installation
･
Remove dirt and oil with a
towel and detergent, and
then dry completely.
To assure the camera doesn't fall !!
Page 1
?
Want to attach it long term?
➡
Go to Page 2
Remove Camera
2 steps
5. Remove the
transparent film
(window side)
3. Fully insert the AC
adaptor connecter
B
A
6. Place the camera on the window
Search for
“Panasonic
HomeHawk”
A
Install the HomeHawk app
B
Set up the app
4. Application Setup
Launch the
HomeHawk app.
Select the device
"WINDOW Camera".
Follow the on-screen
instructions to
complete the setup.
･Blinking red LED is normal.
It’s detecting movement.
･Do you have it already?
Make sure the version is the latest.
After completing setup,
tap the “ ” icon on
the screen.
Months
Power
outlet
Power
outlet
B
While pressing the center,
C
Pull up the LOCK lever to
secure the camera
A
Press the entire camera
firmly against the window
for 3 seconds
A
Press the entire camera
firmly against the window
for 3 seconds
B
C
Loading ...
