Loading ...
Loading ...
Loading ...
9
Installation with the Speed Oven or
Microwave
Notes
ʑ Do not place the oven into the wall cabinet until after
mounting the speed oven on top of the lower oven and
securing it with the universal connector brackets.
ʑ The universal connector brackets are interchangeable
for the left and right sides of the oven. Be sure the
taller vertical edge of the bracket is positioned to the
outside of the oven.
1.
Install both universal connector brackets on top of the
lower oven using six (6) of the screws provided.
Tighten screws securely, but do not overtighten.
2.
Install decorative trim.
3.
Place the speed oven or microwave unit on top of the
universal connector brackets and fasten in place using
three (3) screws per side. Tighten the screw securely,
but do not overtighten.
Note: The existing screws in the speed oven base
help with alignment. When lowering the speed oven or
microwave into place on the universal connector
brackets, allow these screw heads to slide into the
slots as shown in the illustration below. The screw
nearest the front of the speed oven or microwave
should slide into the base of the slope at the front of
the bracket.
4.
Continue to “Connecting the Speed Oven or Steam
Convection Oven Electrical Conduit to the Lower
Oven”.
Oven Mounting Screws
(8)--screws are included
to secure the oven trim to
the cabinet. The screws
are located in a small
plastic bag affixed to the
literature pack bag.
Trim Piece--in plastic bag
on top of oven.
Position the decorative
trim piece so the flanges
with the holes in them
face to the rear of the
oven.
Align the outer flanges
with the outside of the uni-
versal brackets. Fasten
with one (1) screw each
into the end hole of each
universal bracket.
Tighten screws securely,
but do not overtighten.
Loading ...
Loading ...
Loading ...