Loading ...
Loading ...
Loading ...
16
9. Due to the machine’s speed, processing times are much quicker than standard appliances. Until you are
accustomed to the machine, count your time carefully
to avoid over-processing.
10. After pressing the Start/Stop switch to stop the cycle, wait until the blades stop completely before removing the
lid or container from the motor base.
Dry Blade Container
Before using this container for programs or the Variable Speed option, always begin with the Variable Speed
Dial pointed at the Stop Symbol ( ) at the top of the dial.
If purchased, your dry blade container should be used only for hard, dry materials, such as grain, and for
kneading dough.
1. Load the container before placing it on the motor base.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is
inserted through the lid plug opening).
3. With the motor off, set the dry blade container on the motor base by aligning it over the centering pad.
Do not ever attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place.
4. To begin, make sure the On/Off switch is in the On position.
5. Use the Variable Speed dial to select a function.
• Variable Speed - Rotate the dial right of center to Variable Speed 1.
• Programs - Rotate the dial left of center to the desired program.
6. Activate the machine by pressing the Start/Stop Switch. Your container will shift and get into an aligned
position.
• Variable Speed - slowly increase the Variable Speed to the desired speed.
• Programs - The programs vary in blending speed and duration and will automatically stop at the end
of the program. Programs can be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the program will start at the beginning.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...