Loading ...
Loading ...
Loading ...
5.3 Setting and changing the
time
You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut,
flashes.
Press the
or to set the correct
time.
After approximately 5 seconds, the
flashing stops and the display shows the
time of day.
To change the time, press again and
again until starts to flash.
5.4 Preheating
Preheat the empty oven before first use.
Preheat the two ovens. Heat
up one oven at a time.
Set the functions listed
below, if applicable.
1. Set the function and the
maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function
and set the
maximum temperature.
4. Let the oven operate for 15 minutes.
5. Set the function and set the
maximum temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Hob control panel
321
4
5
6
8 7
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor
field
Function Comment
1
- Heat setting display To show the heat setting.
ENGLISH 11
Loading ...
Loading ...
Loading ...