Loading ...
Loading ...
Loading ...
PLAN VENT SYSTEM
Recommended exhaust installations
Typical installations vent the dryer from the rear of the Laundry
Center. Other installations are possible.
--D
A
c
A. Dryer E. Elbow
B. Rigid metal or flexible metal vent F. Clamps
C. Clamps G. Elbow
D. Wall H. Exhaust hood
Optional exhaust installations
This Laundry Center can be converted to exhaust out the right or
left side. To convert the Laundry Center, use Side Exhaust Kit Part
Number 279823. If your Laundry Center was previously exhausted
from the right or left side, it can be converted to rear exhaust by
using standard offset connections. To cover the hole in the side,
one of the following plugs can be added:
692790 (white)
3979370 (graphite)
3977784 (biscuit)
Follow the instructions in the kit to install. Kits are available from
your local Sears store or Sears Service Center.
C
A. Standard rear offset exhaust installation
B. Rear exhaust for offset close clearance connection
C. Left or right side exhaust installation
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best
for your installation. Three close-clearance installations are shown.
Refer to the manufacturer's instructions provided with the vent
system.
S ........
i
i
! i
i!
ii !
i!
,,,! i
A B C
A. Loop system with standard elbows
B. Loop system with one offset and one standard elbow
C. Vent system with one periscope (2" [51 mm] clearance)
NOTE: The following kits for close clearance alternate
installations are available for purchase. To order, please call
1-800-4-MY-HOME ® (1-800-469-4663).
Over-the-Top Installation:
Periscope Installation
(For use with dryer vent
to wall vent mismatch):
Part Number 26-49900
Part Number 26-49901 -
Less than 5" (127 mm)
mismatch
Part Number 26-49908 -
5" (127 mm) to 18" (457 mm)
mismatch
Part Number 26-49904 -
18" (457 mm) to 29" (737 mm)
mismatch
Part Number 26-49905 -
29" (737 mm) to 50" (1.27 m)
mismatch
Speclal provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
2O
Loading ...
Loading ...
Loading ...