Loading ...
Loading ...
Loading ...
14
2. Removing and Installing the Freezer Handle
NOTE: Before beginning, check the handle type of your
model.
Handle Type 1
•Remove the cap (1) and two screws (2) with a flat head
screwdriver.
•Loosen the two screws (3), remove the handle (4) and
install all on the right side.
•Attach the cap and the two screws (that were previously
removed) on the left side (5).
Handle Type 2
It is not necessary to remove this type of handle.
Handle Type 1 Handle Type 2
3. Removing the Refrigerator Door
•Gently remove the top hinge cover with a flat head
screwdriver (1).
•Using the 10 mm open-end wrench, remove the three
bolts and raise the top hinge and place aside (2).
•Remove the pivot (3) and the cap (4), place them in
the opposite side (the cap will be placed in the right
side and the pivot on the left side).
•Slightly raise the refrigerator door (5) and remove it.
•Once the door has been taken off, remove the screws
(6), the bolt (7) and the pivot (8) located below this
and remove the hinge (9).
•Install the hinge (10) on the opposite side of the door,
replacing the screws (11), the bolt (12) and the pivot
(13).
•Take off the washer (14).
•Using the 1/4 inch hex socket wrench loosen the pin
(15) and remove.
•Remove the screws (16 & 17) and the hinge (18).
2
3
1
5
4
5
1
2
3
4
6
7
8
9
10
13
12
11
14
16
17
18
15
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION
Loading ...
Loading ...
Loading ...