Loading ...
Loading ...
Loading ...
10
2. Installing Refrigerator Door
•Remove the cover (1) using a flat head screwdriver (this requires a little force), loosen the two screws (2) and place
on the opposite side.
•Place the hinge (3) on the opposite side and install the four screws (4 & 5).
•Insert the pin (6) in the hinge (3).
•Remove the cover (7) and install it on the right side.
•Place the door and line up with the pin holes (8), making sure that both parts are aligned.
•Place the top hinge (9) and insert the three screws (10).
•Position the cover of the hinge over this (11).
•Check that the door has been installed correctly.
HOW TO REMOVE THE DOOR HANDLES
NOTE: The appearance of the handle may appear
different.
3. Removing the Refrigerator Handle
•Loosen the fixation screws (1) with a 3/32 inch Allen
Wrench and remove the handle (2).
•Remove the assembly screws (3) with a 1/4 inch Allen
Wrench.
•Carefully remove the plug buttons from the door (4).
The buttons can be unscrewed using your fingers,
turning counter-clockwise. Continue turning until the
screw is loose and falls out.
•Install the buttons (4) on the left side.
4. Replacing the Refrigerator Handle
•Rotate handle upside down (1).
•Insert the assembly screws on the opposite side of the
door (2).
•Hold the handle in place with the holes lined up with
the screw holes (3) and tighten the screws (4) in place
with the 3/32 inch Allen Wrench.
1
3
2
4
4
1
2
3
4
Assembly
Screws
Fixation
Screws
Allen
Wrench
2
5
1
6
3
4
8
11
10
9
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION
7
1
Loading ...
Loading ...
Loading ...