Loading ...
Loading ...
Loading ...
Troubleshooting guide:
Symptom Cause and Countermeasure
Cannot play
Check if the disc was inserted correctly.
Check if the disc is scratched or dirty.
Check if there is condensation inside the player. If there is, wait until the condensation is
gone (about 1 hour) before using the player.
If there is a temperature increase error, the CD player will play correctly after it returns to
the normal temperature.
Files with extensions other than “.MP3”, or “.mp3” cannot be played. In addition, the char-
acter codes and number of characters for folder names and file names should be in com-
pliance with the specifications.
Poor sound quality
Check if the disc is scratched or dirty.
Bit rate may be too low.
It takes a relatively long time before the music starts playing.
If there are many folders or file levels on the MP3 disc, or if it is a multisession disc, some
time may be required before the music starts playing.
Music cuts off or skips
The writing software and hardware combination might not match, or the writing speed,
writing depth, writing width, etc., might not match the specifications. Try using the slowest
writing speed.
Skipping with high bit rate files Skipping may occur with large quantities of data, such as for high bit rate data.
Moves immediately to the next song when playing
When a non-MP3 file has been given an extension of “.MP3” or “.mp3”, or when play is
prohibited by copyright protection, there will be approximately 5 seconds of no sound and
then the player will skip to the next song.
Songs do not play back in the desired order
The playback order is the order in which the files were written by the writing software.
Therefore, the files might not play in the desired order.
4-30 Display screen, heater, air conditioner and audio systems
Z REVIEW COPY—
2005 Pathfinder (pat)
Owners Manual—USA_English (nna)
03/30/05—cathy
X
Loading ...
Loading ...
Loading ...