Loading ...
Loading ...
Loading ...
Ice and water dispenser en-us
19
;Ice and water dispenser
Ice an d wa t e r di spenser
You can use the ice and water dispenser to
dispense:
■ cooled water
■ crushed ice
■ ice cubes
Before using for the first time
9 WARNING
RISK OF INJURY!
Never reach into the dispenser opening of the
ice cube container.
9 CAUTION
Do not place bottles or food in the ice cube
container. This can block and damage the ice
maker.
Notes
■ The ice and water dispenser only works when the
appliance is connected to a drinking water
pipeline.
■ Dispose of the first 5 glasses of water and the
first 30-40 ice cubes for hygienic reasons
When the appliance has been connected, there may
be air in the water circuit. Keep dispensing water
until there are no more air bubbles in it.
It takes approx. 24 hours until the first serving of ice
cubes is ready.
Observing drinking water quality
All materials used in the ice and water dispenser are
odorless and tasteless.
If the water has an aftertaste, this may be due to the
following causes:
■ Mineral content and chlorine content of the
drinking water
■ Material of the water pipeline
■ Freshness of the drinking water.
Note: If you dispense water again after a long time, it
may taste stale. In this case, dispose of the first 15
glasses.
You will obtain the best water quality if you dispense
a little water regularly.
The supplied water filter will filter only particles out of
the water, not bacteria or microbes.
Information on operation of the ice maker
Ice cube production starts as soon as the freezer
compartment has reached the set temperature.
The ready ice cubes are automatically discharged
into the ice cube container.
Ice cube production stops as soon as the ice cube
container is full.
Note: You can accelerate ice production by setting a
colder freezer compartment temperature. This will
slightly increase energy consumption.
Dispensing ice and water
Notes
■ To prevent the ice from falling on the floor, hold
the glass directly under the dispenser when
dispensing crushed ice.
■ To prevent water damage, the water dispenser
automatically stops after 30 seconds of
continuous dispensing. If you want to dispense
more water, wait 5 seconds and then press the
button again.
■ The dispensed water is cooled to a palatable
temperature. To obtain a colder drinking
temperature, put additional ice cubes in the
glass.
■ The water may become warmer when dispensing
large amounts of water.
1. Hold the glass under the dispenser.
2. Keep pressing the dispensing button until the
required quantity of ice or water is in the glass.
=Defrosting
De f r o s t i n g
Freezer compartment
The fully automatic NoFrost system ensures that the
freezer compartment remains frost-free. Defrosting is
no longer required.
Loading ...
Loading ...
Loading ...