Loading ...
Loading ...
Loading ...
Operating the appliance en-us
15
Switching the water filter counter on and
off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
1. Press " button to open the Settings menu.
2. Use ( button to move to the Appliance settings
menu.
3. Press 8 button.
4. Press ) button to move to the menu item Water
filter counter.
5. To change the setting, press " button.
Dispenser light
Use this function to set how long the light will
illuminate the ice and water dispenser.
Adjusting dispenser light
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Press > button to move to the menu item
Dispenser light.
5. Press " button to open the menu item.
6. Press > button to select the required duration.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Motion sensor
When the motion sensor is switched on, the ice and
water dispenser light automatically switches on as
soon as a glass is held underneath.
Switching motion sensor on or off
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Press > button to move to the menu item Motion
sensor.
5. Press " button to open the menu item.
6. Use the > button to move to the menu item On or
Off.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Theater mode
If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
1. Press " button to open the Settings menu.
2. Use ( button to move to the menu item Appliance
settings.
3. Press 8 button to open the menu item.
4. Use ) button to move to the menu item Theater
mode.
5. Press " button to open the menu item.
6. Use ) button to move to the menu item On or Off.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Resetting to the factory settings
1. Press " button to open the Settings menu.
2. Use ( button to move to the menu item Appliance
settings.
3. Press 8 button.
4. Use ( button to move to the menu item Factory
settings.
5. Press " button.
A signal tone sounds, and a prompt to confirm
reset appears.
6. Press 8 button.
All settings are reset to the factory settings.
7. Press ; button to exit the menu.
Switching demo mode on or off
The cooling function of the appliance is switched off.
All other functions can be used.
Note: Do not store any food items in demo mode as
the appliance remains at room temperature.
1. Press " button to open the Settings menu.
2. Use ( button to move to the menu item Appliance
settings.
3. Press 8 button.
4. Use ( button to move to the menu item Demo
mode.
5. Press " button.
6. Use ( ) buttons to select the setting On or Off
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Sabbath mode
All non-essential functions are switched off so you
can also use the appliance on the Sabbath.
The appliance switches off the following:
■ Automatic door opening
Note: With handle-free installation, please note that
you will not be supported when opening the door
during this time. To open the door in this case,
reach from below under the bottom panel of the
unit.
■ Ice maker
■ Audible signals
■ Interior light
■ Messages on the display
■ Background illumination of display is reduced
Loading ...
Loading ...
Loading ...