Loading ...
Loading ...
Loading ...
Instructions for the installer
36
6. POSITIONING IN THE COUNTER TOP
The following operation requires building and/or carpentry work so must be
carried out by a competent tradesman.
Installation can be carried out on various materials such as masonry, metal,
solid wood or plastic laminated wood as long as they are heat resistant (T
90°C).
6.1 Fixing to the supporting structure
Create an opening with the dimensions shown in the figure in the top surface of
the counte.
A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) X (mm) Y (mm)
min 145 min 460 min 750 20÷40 min 50 690 555÷560 478÷482
Carefully position the supplied insulating seal on the outer perimeter of the hole
made in the counter top as shown in the figure below, trying to make it stick on
the entire surface by applying light pressure on it with your hands. Refer to the
dimensions in the figure, bearing in mind that the sides A must brush against the
hole. Fix the hob to the unit using the appropriate brackets B supplied.
Carefully trim the surplus away from edge C beyond the seal. The dimensions
given in the following drawing refer from the hole to the inside of the seal.
Loading ...
Loading ...
Loading ...