Loading ...
Loading ...
Loading ...
8
NOTE:
The humidity displayed is only for reference. For
accurate humidity, please check a hygrometer.
Humidity Level
Digital Display
NOTE:
Humidity can only be adjusted manually in
Manual Set mode. In Continuous and Auto Dry
mode, humidity level is set automatically.
1. Press the Plus or Minus button to set the
desired humidity level. Desired humidity in
the digital display will flash for 5 seconds after
operation.
2. Actual room humidity will be displayed after
5 seconds of flashing the desired humidity.
Display shows relative humidity or time
(depending on setting).
1. When the dehumidifier operates in Manual
Set mode, the display shows the relative
humidity of the room.
2. When the timer is selected, the display shows
the time when the dehumidifier will turn on or
turn off operates, depending on the setting.
Timer
To set Timer for a 30-minute to 24-hour delay
before the dehumidifier is turned off (the
dehumidifier must be On):
1.Press TIMER. Timer indicator light will come
on, and the display will flash. The display will
show remaining time before the dehumidifier
will turn off.
2. Press the Plus or Minus button to change the
delay time, from 30 minutes to 24 hours.
When the light is on, it will remain on for 180
hours or until you press Clean Filter button.
NOTE:
1. When the Clean Filter indicator light is on,
remove, clean and replace the air filter. See
“Cleaning the Air Filter”.
2. Press the Clean Filter button to reset the filter
monitor.
Clean Filter
To set Timer to turn on the dehumidifier, with
previous setting:
To clear the Timer delay program:
To see the remaining time.
1. Press TIMER once after it has been
programmed. Display will show remaining time.
2. While the display is showing the remaining
time, press TIMER again. Timer indicator light
will turn off.
Press TIMER once after it has been programmed.
Display will show remaining time.
NOTE: Dehumiditier can be either on or off.
NOTE:
Empty the drain water bucket before setting
the timer function. If the water bucket
becomes full during the Timer function, the
Bucket Full light goes on and
dehumidification stops.
1. Turn off the dehumidifier.
2. Press TIMER. Timer indicator light will flash.
The display will show remaining time before
the dehumiditier will turn on.
3. Press the Plus or Minus button to change the
delay time, from 30 minutes to 24 hours.
Loading ...
Loading ...
Loading ...