Loading ...
Loading ...
Loading ...
15
Before calling for service, try the suggestions below.
Is the dehumidifier turned on?
Turn on the dehumidifier.
Dehumidifier will put out warm air under
normal operating conditions.
If the dehumidifier displays an error code,
please contact Hisense customer service.
All models have an automatic de-icing
function that will shut off the compressor
and allow the fan to run.
When the de-icing function senses the
correct operating temperature, the
compressor will cycle back on.
The filter is dirty or obstructed debris.
Clean the filter.
■ Is the power cord plugged into a grounded
three-prong outlet?
Plug into a grounded three-prong outlet.
See “Electrical Requirements” on page 5.
Has a housedhold fuse blown or has a circuit
breaker tripped?
Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
See “Electrical Requirements” on page 5.
Is the bucket installed properly?
Reinstall the bucket so that it fits all the way
into the dehumidifier.
Does the bucket need to be emptied?
Empty the bucket.
Is the water level float in place?
Remove the bucket. Make sure the float is
snapped in place. Reinstall the bucket.
Did the dehumidifier suddenly stop operating,
and won't turn on?
Confirm the power is connected, and the bucket
is in place. If the unit still doesn't operate, call
Hisense for Warranty service.
Dehumidifier will not run
Dehumidifier runs but does not dehumidify
Air coming from the dehumidifier is worm
Dehumidifier displays error codes
Loading ...