Loading ...
Loading ...
Loading ...
9ICE & WATER INSTALLATION
Always fit filter as per manufacturer’s instructions.
If you need to replace water tube, only use approved
water quality piping that meets the pressure
requirements.
DO NOT allow the water tubing to become kinked
or trapped under the refrigerator when moving the
refrigerator back into position.
Make sure your refrigerator is level to avoid uneven
or oversize cubes. Uneven ice cubes may lead to the
dispenser chute becoming blocked.
After installation, run the water dispenser for a few
minutes to ensure that all air bubbles have been
purged from the tubing. Dripping may occur if air
bubbles remain in the tube.
Replace filter at suggested intervals to avoid water/ice
reduction and irregularities in taste.
Remove and clean ice bin once a month, discarding
unused ice cubes. This will ensure fresh, clean ice and
smooth operation of your ice maker.
Clean and empty the dispenser drip tray regularly to
avoid overflow.
As the water/ice cut o is not instant, leave glass
under dispenser briefly until water or ice has stopped
flowing to avoid spills.
Always place ice in glass before filling with water to
avoid splashing.
When dispensing ice hold the container close to the
chute to avoid spray or spills.
If you are using your refrigerator for the first time, or if
you have not used the dispenser for some time:
• Discard the first seven or eight cups of water
• Discard any ice that the ice maker produces in the
first 24 hours (contaminants could have settled in the
water pipes).
WARNING
WARNING
Connect to potable water supply only. Do not put
fingers into the ice crusher. Surfaces there may be sharp.
X
X
X
TIPS AND USEFUL INFORMATION
Loading ...
Loading ...
Loading ...