Loading ...
Loading ...
Loading ...
When the
or , Audio, 1, 2, 3, 4, 5, 6, BAND/AS
buttons and SRC are pushed in ⬙Mute/Paused⬙ mode,
these will be implemented and the audio will be
restored without changing the original volume.
Turn the ROTARY knob to restore the audio and change
the volume to the level selected. The display will show
the settings described in the volume function.
The other buttons should be implemented when pushed,
but the radio will remain in ⬙MUTE ON⬙ mode.
Storing Stations In Memory
Push and hold the memory buttons (1 through 6) for
more than two seconds to associate the tuned station
with the pushed button. The display will show a message
in ⬙MEMO 2⬙ format for three seconds to confirm that the
station has been tuned in. The CH signal is then activated
and the display will show the preset number and station
frequency for three seconds ⬙2 106.9⬙. The display will
then return to the previous view.
Accessing Preset Stations
When the preset buttons (1 through 6) are pushed for less
than two seconds the radio will tune in to the station
associated with that particular memory location. The
display shows the preset number and frequency of the
associated station for three seconds. The display will then
return to the previous view.
Retuning the band: When the BAND/AS button is
pushed for less than two seconds, the radio will alternate
between bands in the sequence: FM1
FM2 FM3
AM1 AM2 FM1. While changing bands from
the FM3 band to AM1, the display will show ⬙AM⬙
for two seconds and when changing from the AM2
band to
FM1, the display will show ⬙FM⬙ for two
seconds.
The display will then show the selected band and fre-
quency in the format ⬙F1 106.9⬙ for two seconds and then
return to the previous view.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 159
Loading ...
Loading ...
Loading ...