Loading ...
Loading ...
Loading ...
15
·
·
Please keep the machine clean and perform correct
maintenance to prolong its service life of washer.
Make sure that the power plug is disconnected before the cleaning and maintenance.
16
Cleaning the water inlet hose joint
Unscrew and remove the water inlet hose joint from the washer and clean the screen of the
inlet valve with brush.
！
NOTICE
Cleaning and Maintenance
No
washing
Abnormal
draining
Abnormal
spin
trouble shooting
List of faults and inspection
Faults
Inspection Items
No water
flows in
·
·
·
·
·
·
If the power is off or the fuse is burned out.
If the water supply is cut off or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the screen of the inlet valve is blocked by dirt.
If the inlet valve works. (when the inlet valve is switched on, a slight
sound will be heard)
If the [Start / Pause]button is pressed after the power
switch is pressed.
·
·
·
·
If the lid is closed.
If clothing piled up at one side of the barrel or the clothing
put in is beyond the rated capacity.
If the machine is placed unsteadily . (The ground is not flat).
If the motor belt is loose.
Note: During the de spin process, if cloth are piled at one side of the barrel, it will stop
because of unbalance. The user of the machine will detect this and try to correct it
by adding water.
If the unbalance situation can not be solved after three try ,the use will be asked
to replace the clothes manually.
If the machine does not work normally, or alarms, please check as the following list.
If the problem persists, please contact local service office or the sales service
department of our company. The customer should not dismantle the machine without
permission.
·
·
·
If the water drain hose is placed too high.
If the end of water drain hose is blocked.
If the internal rubber ring of the drain valve is blocked by dirt.
·
·
·
·
If the power is off or the fuse is burned out.
If the power supply voltage is too low.
If the water reaches to the required water level.
(The machine will not work before reaching the required water level)
If it is set to "Delay" washing mode. (It will only start upon the
reservation time)
Loading ...