Loading ...
Loading ...
Loading ...
Remove from the packaging
Installation of the drain hose if not fitted
· Remove package and take out the bottom board of
the cabinet from the foam cushion.
Open the lid of the washer to take out accessories.
Operation or washing on the foamed cushion is
strictly forbidden.
·
·
Base foamed cushion
Installation of the water inlet hose
5
Water inlet hose
Clamping nut
6
Installation Installation
Tightly screw the other end of the inlet hose on the
water inlet valve . (with rubber sealing ring inside).
Note: When tightening the clamping nut, evenly apply the
force and do not twist the valve in case breaking
the valve joint.
Fasten one end of the inlet hose to the tap
(there is a rubber sealing washer inside)
· Completely slide the drain
hose over the sewer.
· Fix it with the hoop.
( As shown in the figure )
Loading ...
Loading ...
Loading ...