Loading ...
Loading ...
Loading ...
8 operating sequence – rotary control oven electrolux e:line ovens electrolux e:line ovens cooking with the timer – rotary control oven 9
Selectthecookingfunction
cooking function. The oven cavity light will come on.
Select the temperature
light above the temperature selector will come on.
the oven temperature falls below the desired setting,
the heating source switches on and the indicator light
comes on again.
round in a clockwise direction as this will result in
damage to the thermostat.
Not e:
Temperature estimations
temperatures, use the following table to determine the
temperature (°C).
oven temperature°C temperature°F
Lowheat
Cool
Slow
80
Moderateheat
Moderately slow
Moderate
Moderately hot
Highheat
Hot
Extremely hot
Operating sequence –
rotary control oven
tips and information
Pre-heating
your food at the correct temperature for the entire cook time.
1.With‘RapidHeat’function
This function allows your oven to reach preset temperature
quicker than any other cooking function. Turn the function
by rotating your oven temperature selector.
goes out, the oven has reached the desired temperature.
Select the oven function you require for cooking and place
the food in the oven.
2.Withotherovenfunctions
Set the desired temperature by rotating your oven temperature
reached the desired preset temperature, place your food in
the oven, close the door and set the timer if you desire.
3.With‘Grill’function
tips and information
Cooling/Ventfan
prevents your kitchen cabinet from overheating and
whenever you are using your oven and blow warm air
across the top of the oven door.
Condensation
happen when you are cooking large quantities of food
from a cold start. You can minimise condensation by:
– Keeping the amount of water used whilst cooking to
a minimum.
than the water container.
– Cooking casseroles with the lid on.
Your oven is equipped with a 3 button timer that has the
following features:
when the set time has elapsed.
count down the preset cooking time, beep when the
time has elapsed and turn the appliance off.
reached the timer will beep and turn the appliance off.
cooking time and end cooking time to switch oven on
Selecting the timer
and
in minutes.
Settingthecookingduration
will come on.
and
buttons. Five seconds after the last change the cook
be displayed.
Note:
Settingthecookingendtime
1. Check that the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
Cooking with the timer –
rotary control oven
pressing or buttons. Five seconds after the last
the current time of day will be displayed.
Settingthedelayedstartcookingtime
previous sections.
Tocheckorcancelsettings
MODE button until the
to the mode (cook time, end time etc) that is currently
on display.
MODE button until
button until the clock no longer reverses (you will hear
MODE button until
button until the clock no longer reverses (at 0:00 you will
the oven will continue to heat until you manually turn it
off.
Oncompletionofcooking
still retain substantial heat. This will continue to cook the
do not plan on being present when the oven turns off,
you should take this extra heating time into account.
position.
Adjustingtheclock
or buttons to change the time of day.
cook time
end time
MODE
timer
clock
cook time
end time
MODE
timer
clock
cook time
end time
MODE
timer
clock
Loading ...
Loading ...
Loading ...