Loading ...
Loading ...
Loading ...
English
15
TROUBLESHOOTINGTIPS FOR GREAT RESULTS
CARE AND CLEANING
Blender does not operate when a setting is selected
All indicator lights are flashing alternately.
The Blender may be jammed. If it is
jammed, the Blender will stop running to
avoid damage to the motor. Press POWER
( )
to reset the Blender and unplug the
power cord. Remove the pitcher assembly
from the base and, with a scraper, free
the blades by breaking-up or removing the
contents at the bottom of the pitcher.
No indicator lights are lit.
Check to see if the Blender is plugged
into a grounded outlet. If it is, press
POWER
( )
; then unplug the Blender.
Plug it back in to the same outlet, and
Press POWER
( )
. If the Blender still
does not work, check the fuse or circuit
breaker on the electrical circuit the
Blender is connected to and make sure
the circuit is closed.
All indicator lights are flashing
at the same time.
The Blender may be overloaded. If the
Blender becomes overloaded when
blending heavy ingredients, it will
automatically shut off to avoid damage to
the motor. Press POWER
( )
to reset
the Blender and unplug the power cord.
Remove the pitcher assembly from the
base and divide contents into smaller
batches. Adding liquid to the pitcher may
also reduce the load on the Blender.
If the problem cannot be fixed with the steps provided in this section, contact an authorized
service center.
Blender stops while blending
One indicator light is flashing alternately.
If the Blender is plugged in, but will not
start and one light is flashing alternately
from all the other indicator lights, the
Blender may have a stuck key. Press
POWER
( )
to turn off the Blender;
then unplug the Blender. Plug the Blender
back in and press POWER
( )
to turn
back on to reset the stuck key.
All indicator lights are flashing at the
same time.
If Blender is plugged in, but nothing
happens when POWER
( )
is pressed, and
all indicator lights are flashing, the motor
rotor may be locked. Press POWER
( )
;
then unplug the Blender. Plug it back in;
then press POWER
( )
and select the
desired speed.
IMPORTANT: The Blender will not operate at any speed unless the POWER
( )
button is
pressed first.
Loading ...