Loading ...
Loading ...
Loading ...
5. Remove the second wing nut that secures
the jack retention bracket by turning it
counterclockwise. Then remove the jack
kit from your vehicle.
6. Remove the jack and the wrench from
the felt bag. Fold down the wrench socket
used to loosen the lug nuts and to
operate the jack.
Vehicle Jacking
E142551
1. Block the diagonally opposite wheel.
2. If your vehicle has wheel covers, remove
them with the lug wrench tip and loosen
each wheel lug nut one-half turn
counterclockwise. Do not remove them
until the wheel is raised off the ground.
3. The vehicle jacking points are shown here,
and are depicted on the warning label on
the jack.
E145908
Note: Jack at the specified locations to avoid
damage to the vehicle.
4. Small arrow-shaped marks on the sills
show the location of the jacking points.
E142553
5. Remove the lug nuts with the lug wrench.
6. Replace the flat tire with the spare tire,
making sure the valve stem is facing
outward. Reinstall the lug nuts until the
wheel is snug against the hub. Do not fully
tighten the lug nuts until the wheel has
been lowered.
7. Lower the wheel by turning the jack
handle counterclockwise.
1
2
3
4
5
E75442
8. Remove the jack and fully tighten the lug
nuts in the order shown. See Technical
Specifications (page 288).
286
MKS (), enUSA
Wheels and Tires
Loading ...
Loading ...
Loading ...