Loading ...
Loading ...
Loading ...
Press the OFFcontrol down and release or
turn off the ignition.
USING ADAPTIVE CRUISE
CONTROL (If Equipped)
WARNINGS
Always pay close attention to changing
road conditions, especially when using
adaptive cruise control. Adaptive cruise
control cannot replace attentive driving.
Failing to follow any of the warnings below
or failing to pay attention to the road may
result in a crash, serious injury or death.
Adaptive cruise control is not a crash
warning or avoidance system.
Adaptive cruise control will not detect
stationary or slow moving vehicles
below 6 mph (10 km/h).
Adaptive cruise control will not detect
pedestrians or objects in the roadway.
Adaptive cruise control will not detect
oncoming vehicles in the same lane.
Do not use the adaptive cruise control
when entering or leaving a highway, in
heavy traffic or on roads that are
winding, slippery or unpaved.
WARNINGS
Do not use in poor visibility, specifically
fog, rain, spray or snow.
Note: It is your responsibility to stay alert, drive
safely and be in control of the vehicle at all
times.
The system adjusts your speed to maintain
a proper distance between you and the
vehicle in front of you in the same lane. You
can select from one of four gap settings.
E173593
The controls for using your cruise control are
located on the steering wheel.
Setting Adaptive Cruise Control
Press and release ON.
E144529
The information display will show
the grey indicator light, current
gap setting, and Set. The system
is set to standby mode.
E173594
The current gap setting and SET will also
display.
Setting a Speed
1. Accelerate to the desired speed.
2. Press SET upward and release. The
vehicle speed will be stored in the
memory.
3. The information display will show a green
indicator light, current gap setting and
desired set speed.
4. Take your foot off the accelerator pedal.
164
MKS (), enUSA
Cruise Control
Loading ...
Loading ...
Loading ...