Loading ...
Loading ...
Loading ...
27
English
■ To turn the power ON/OFF with the remote
control
To turn the power on
●
When the power of the unit is on (Power Indicator -
red), press <POWER ON button (
)> then the picture
will be displayed.
●
Power Indicator: Green (Picture is displayed.)
To turn the power off (Standby condition)
●
When the power of the unit is on (Power Indicator -
green), press <STANDBY button (
)>, then the power
will be turned off.
●
Power Indicator: Red (standby)
Note
●
After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
●
Press the <Power button (
) (Unit)> on the unit to
turn the unit off, when the power of the unit is turned
on or in standby mode.
■ When the Unit is turned on for the first time
Following screen will be displayed.
Important:
Please read carefully.
This product’s power save mode has been set to enable (low power mode)
before shipping. (To reduce power consumption in standby mode)
During power standby at low power mode settings:
- LAN function cannot be used.
Are you sure you want to use low power mode?
Please select “YES“ if you agree with this condition.
Yes No
■ Power save mode
When this TV is turned on for the first time after being
shipped from the factory, the power save mode setting
screen will be displayed.
[Yes]:TheTV᾿sconsumptioninstandbymodeis
reduced. However, the startup time from standby
mode becomes longer.
[No]: It is reduced that startup time from standby
mode. However, more power will be consumed in
standby mode.
Even after being set, you can change the “Power save
mode”. (see page 41)
Selecting the input signal
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Unit
Input
TV
HDMI1
HDMI2
PC
USB
ENTER
Move Select
[TV]: Antenna terminal
[HDMI1]: HDMI 1 terminal, HDMI input
[HDMI2]: HDMI 2 terminal, HDMI input
[PC]: PC Input Terminal
[USB]: USB terminal, USB input
Loading ...
Loading ...
Loading ...