Loading ...
Loading ...
Loading ...
About the fresh food compartment shelves.
About the temperature control dial. GEAppliances.com
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Full-Width Shelves
Some models have a stationary tempered
glass shelf, a spillproof shelf, or two steel
wire stationary shelves. These shelves can
be moved to another place in the fresh food
compartment.
When placed correctly on the shelf supports,
the shelf will stop before coming completely
out of the refrigerator and will not tilt when
you place food on it or remove food from it.
Half-Width Shelves
One end of the shelf rests on a molded side-wall
support; a bracket on the other end hooks into
a track on the rear cabinet wall.
To remove, lift the shelf up at front, then o the
support and out of the track.
To replace, select desired shelf height. With
shelf front raised slightly, hook the bracket’s top
lug into the track, then lower the shelf onto the
support.
NOTE: The shelf to the right of the track is
designed to hook into the right-hand slot; the
shelf to the left is designed
to hook into the left-hand
slot.
2
Lift up and out
1
Tilt up
To remove a full-width shelf when the
fresh food compartment door cannot
be opened fully
Lift rear
Pull forward and down
Lift rear
Pull forward
To remove the full-width shelves
5
Turning the dial to OFF stops cooling in both compartments—fresh food and freezer. It does not shut o power to
the refrigerator.
Temperature Control Dial (on some models)
The temperature control dial adjust refrigerator from warmest to coldest.
The recommended factory setting is shown in illustration to the left. For colder
temperature turn dial clockwise toward snowake. For warmer temperature turn
dial counter clockwise away from snowake. allow 24 hours for adjustment.
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Recommened
factory setting
Coldest setting
Warmest setting
OFF
OFF
OFF
Loading ...
Loading ...
Loading ...