Loading ...
Loading ...
Loading ...
6.Fortypical under counter installation of an electric built-in oven see Figure below.
Only certain cooktop models may be installed over cer-
tain built-in electric oven models. Approved cooktops
and built-in ovens are listed by the MFG ID number and
product code (seethe insert sheet included in the litera-
ture package and cooktop installation instructions for the
dimensions).
To reduce the risk of
personal injury and
tipping of the wall
oven, the wall oven
must be secured to
the cabinet (s) by
mounting brackets,
Approx. 3"
(7.5 cm)
208/240 Volt junction
for built-in oven.
I
I
I
Cabinet side filler panels are
necessaryto isolate the unit
from adjoining cabinets. Cabinet
side filler height should allow for
installation of approved cooktop
models
36" Min.
(91.4 cm) Min.
Use3/4" (1.9 cm) plywood, installed
on two runners, flush with toe plate.
Basemust be capable of supporting
150 pounds (68 kg) for 27" models and
200 pounds (90 kg) for 30" models.
Cut an opening in wood base minimum 9" x 9"
(23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armoured cable to junction box.
4 1/2" (11.5 cm) Max.*
* If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
27" (68.6 cm) 247/8" (63.2 cm) Min. 23Y2" (59.7 cm) Min. 27¼" (69.2 cm) Min.
Wall Oven 25¼" (64.1 cm) Max. 281/2'' (72.4 cm) Max.
30" (76.2 cm) 281/2" (72.4 cm) Min. 27¼" (69.2 cm) Min.
Wall Oven 29" (73.7 cm) Max. 23Y2" (59.7 cm) Min. 281/2'' (72.4 cm) Max.
Figure 9 - TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRICBUILT-IN OVEN
WITH AN ELECTRICCOOKTOP MOUNTED ABOVE
7
Loading ...
Loading ...
Loading ...