Loading ...
Loading ...
Loading ...
i IMPORTANT
Do not lift the oven by the door handle.
3.Insert the oven into the cabinet opening. Slide oven
inward leaving 11/2"(3.8 cm) clearance between the
oven and front of cabinet (seeFigure 6). Pull the
armored cable through the hole for it in the cabinet and
toward the junction box while moving the appliance
inward.
1Y2" (3.8 cm)
clearance
between unit
Figure 6
4. Pushthe oven in and against the cabinet; the oven side
bracket will clip into the mounting bracket installed into
the side of cabinet.
Topull out the oven for servicing you must usethe two
tools supplied with the oven. Insert one tool into hole in
each side of oven frame. Holes are visible when door is
opened. After inserting tools pull the oven towards you
(see Figure 7).
5.Bottom Trim Installation:
(Note for the double wall ovens only: If the cutout height
is between 51W1J' (131.6 cm) and 511s/1J' (131.9 cm)
usethe larger bottom trim.)
Placethe top of the bottom trim over the side trim tabs
on each side of the oven below the oven door and fix it
using the 2 screws supplied in the mounting holes
located on each side trim below the oven frame (see
figure 8).
i
f
!/
Oven
side -.
trim _•
/
Oven
Mounting
bracketinstalled
in cabinet
Cabinet
Right
Side
Tool
supplied I
Mounting
bracket
released
Oven removed
from the cabinet
Hole where to
insert the tool
Figure 7
Screws
--Bottom Trim
Figure 8
6
Loading ...
Loading ...
Loading ...