Subaru 2020 WRX WRX Limited

User Manual - Page 314

For 2020 WRX WRX LIMITED.

PDF File Manual, 488 pages, Download pdf file

Loading ...
Loading ...
Loading ...
(314,1)
北米Model "A1747BE-B" EDITED: 2019/ 12/ 19
! To decrease the speed (by the “RES/
SET” switch)
S07AQ0406
Press the “RES/SET” switch to the “SET”
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
You can lower the set speed 1 mph (1.6
km/h) or 1 km/h (0.6 mph) each time by
pressing the “RES/SET” switch to the
“SET” side quickly.
! To decrease the speed (by brake
pedal)
S07AQ0404
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the “RES/SET”
switch to the “SET” side once. Now the
desired speed is set and the vehicle will
keep running at that speed without depres-
sing the accelerator pedal.
& Cruise control indicator
S07AQ05
Refer to “Cruise control indicator” F3-35.
& Cruise control set indicator
S07AQ06
Refer to “Cruise control set indicator” F3-
35.
BSD/RCTA (if equipped)
S07BM
The BSD/RCTA consists of rear corner
radar with Blind Spot Detection and Rear
Cross Traffic Alert.
These functions enable the system to
detect objects or vehicles to the rear,
drawing attention to the driver when
changing a lane or when driving in reverse.
WARNING
The driver is responsible for driving
safely. Always be sure to check the
surroundings with your eyes when
changing lanes or reversing the
vehicle.
The system is designed to assist the
driver in changing lanes or rever-
sing safely by monitoring the rear
and side areas of the vehicle. How-
ever, you cannot rely on this system
alone in assuring the safety during a
lane change or reversing. Overcon-
fidence in this system could result in
an accident and lead to serious
injury or death. Since the system
operation has various limitations,
the flashing or illumination of the
BSD/RCTA approach indicator light
may be delayed or it may not operate
at all even when a vehicle is present
Starting and operating/BSD/RCTA
7-56
Loading ...
Loading ...
Loading ...