Loading ...
Loading ...
Loading ...
(179,1)
北米Model "A1747BE-B" EDITED: 2019/ 12/ 19
! Screen Settings
S03BN0701
After entering the “Screen Settings” menu,
select one of the following menus.
! Welcome Good-bye Screen
S03BN070101
The welcome screen/good-bye screens
can be activated or deactivated. Select
“On” to activate the screens. Select “Off” to
deactivate the screens.
! Gauge Initial Movement
S03BN070102
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the “ON”
position can be activated or deactivated.
Select “On” to activate. Select “Off” to
deactivate.
! Gear Position Indicator Setting
(MT models)
S03BN070104
Display of the shift position indicator can
be activated or deactivated. Select “On” to
activate display of the shift position in-
dicator or “Off” to deactivate it.
! Languages
S03BN070103
Operate the “ ” or “ ” switch on the
steering wheel to display the preferred
language. Then pull the “
/SET” switch to
select the displayed language.
! SRH (if equipped)
S03BN0714
Select “On” to activate the Steering Re-
sponsive Headlight (SRH). Select “Off” to
deactivate the SRH.
! REV setting (STI)
S03BN0705
NOTE
If the setting of the REV Indicator Light
is “Off”, the setting menus of the REV
Alarm Level Engine Speed and the REV
Buzzer are not displayed.
After entering the “REV setting” menu,
select any of the following menus.
! REV Indicator Light
S03BN070501
Display of the REV indicator light can be
activated or deactivated. Select “On” to
activate display of the REV indicator light
or “Off” to deactivate it.
! REV Alarm Level Engine Speed
S03BN070502
The alarm-level engine speed can be set
(in 100 rpm steps) within the range from
2,000 rpm to the red zone.
! REV Buzzer
S03BN070503
The REV buzzer can be activated or
deactivated. Select “On” to activate the
REV buzzer or “Off” to deactivate it.
! EyeSight (models with the EyeSight
system)
S03BN0702
NOTE
Refer to the Owner’s Manual supple-
ment for the EyeSight system.
! BSD/RCTA (if equipped)
S03BN0710
After entering the “BSD/RCTA” menu,
select the “Warning Volume” menu. You
can set the volume of the warning buzzer
for RCTA (Rear Cross Traffic Alert). You
can select “Max”, “Mid”, “Min” or “Off”.
! RAB (models with the EyeSight
system)
S03BN0712
After entering the “RAB” menu, select one
of the following menus.
NOTE
For details about the Reverse Auto-
matic Braking system, refer to “Re-
verse Automatic Braking System” F7-
66.
! Warning Volume
S03BN071203
The volume of the warning sound that is
activated when the Reverse Automatic
Braking system is in operation can be set
in 3 stages (“Max”, “Mid” and “Min”).
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-43
3
Loading ...
Loading ...
Loading ...