Loading ...
Loading ...
Loading ...
Building in the appliance
88
While counterholding the adjusting
bolts with a screwdriver, tighten
the nuts on the appliance door
with a box wrench.
The filler strip must not protrude; it
must completely disappear into the
niche.
Pre-drill fixing holes in the cabinet
door and fasten the screws. Make
sure both metal edges are flush
(//symbol).
Close the appliance door and the
cabinet door.
- Adjusting the depth (Z)
Loosen the screws at the top of
the appliance door, and loosen the
hexagon-headed screw at the bot-
tom of the fixing bracket. By moving
the cabinet door, create a gap of
1/16" (2mm) between the cabinet
door and the housing unit.
Loading ...
Loading ...
Loading ...