Loading ...
Loading ...
Loading ...
Building in the appliance
81
Carefully remove the protective film
from the profile strip.
Stick the profile strip onto the side
of the appliance on which the door
will open, flush with the front.
1. Align the profile strip with the bottom
edge of the top fixing bracket.
2. Stick it down along its entire length.
Building in the appliance
If the appliance is pushed too far into
the niche, the appliance door may
not close properly once the cabinet
door has been fitted. This can cause
ice to build up and condensate to
accumulate, and cause the appliance
to malfunction. These issues can all
lead to increased energy consump-
tion.
Push the appliance into the building-
in niche, making sure a gap of
15/8" (42mm) is maintained all
around between the appliance cas-
ing and the front of the cabinet side
walls.
Loading ...
Loading ...
Loading ...