Loading ...
Loading ...
Loading ...
396
6-3. Do-it-yourself maintenance
AVALON_U
■
When registering ID codes
●
Before performing ID code registration, make sure that no wheels with
tire pressure warning valve and transmitters installed are near the vehi-
cle.
●
Make sure to initialize the tire pressure warning system after registering
the ID codes. If the system is initialized before registering the ID codes,
the initialized values will be invalid.
●
As the tires will be warm when registration is completed, make sure to
allow the tires to cool before performing initialization.
■
Canceling ID code registration
●
To cancel ID code registration after it has been started, turn the engine
switch off before driving the vehicle.
If the vehicle is driven after ID code registration is started, to cancel reg-
istration, perform the ID code registration start procedure again and turn
the engine switch off before driving.
●
If ID code registration has been canceled, the tire pressure warning light
will blink for approximately 1 minute when the engine switch is turned to
IGNITION ON mode and then illuminate. The tire pressure warning sys-
tem will be operational when the tire pressure warning light turns off.
●
If the warning light does not turn off even after several minutes have
elapsed, ID code registration may not have been cancelled correctly. To
cancel registration, perform the ID code registration start procedure
again and then turn the engine switch off before driving.
Loading ...
Loading ...
Loading ...