Loading ...
Loading ...
Loading ...
13
Dishwasher Cycles and Options
Wash Cycles
Note: In order to save energy, it is recommended to set the “Auto Power Off” feature
(available on select models) to P:01 (see manual section titled “Auto Power Off”).
Heavy: Best for cleaning items with baked-on food or grease. These
dishes would normally require soaking.
Auto: Our smartest cycle, with our most flexible soil sensing capability,
this cycle is optimal for use with mixed dishware and food soils.
Normal:
This is the cycle recommended for daily, regular or typical use to
completely wash a full load of normally soiled dishes.
In order to obtain optimal performance with minimum energy consumption, it is recommended to disable
all available options and settings, except “Auto Power Off” as noted at the start of this section
.
Note 1: See footnote for additional energy test setup instructions.
Speed60®*: Cleans freshly soiled dishes with easy to remove soils. This
cycle reduces cycle time while still including drying.
Rinse*: Allows you to rinse food soil off of a partial load and hold the
dishes in the dishwasher until you are ready to run a full load. Do not
use detergent in this cycle.
Wash Cycle Options
Delay Start: Allows you to delay the start time of your dishwasher up to 24
hours.
SpeedPerfect
™
*
:
SpeedPerfect™ is an option that allows saving time with-
out sacrificing wash and dry performance. Selecting this option ensures the
same final temperatures as the underlying cycle, while heating up the dishes
quicker. Also, selecting this option increases energy consumption but also
reduces cycle time. The SpeedPerfect™ option is available with Heavy, Auto,
Eco and Normal cycles.
Delicate: The Delicate option is available only in the Heavy, Auto and
Normal cycles. This cycle is best used for lightly soiled items with easy
to remove food soils.
Sanitize: The Sanitize feature is available only in the Heavy, Auto and Nor-
mal cycles. The Sanitize LED will light when sanitation requirements are
met. The technical sanitation measures may also improve the drying results.
Note: The dishwasher automatically defaults to Auto when turned off and back on. If
you used the sanitize option in your last cycle, the dishwasher will default to Auto
Wash with the Sanitize option selected when you turn it on.
Extra Shine®: Used in combination with a wash cycle (except Rinse), the
Extra Shine® option raises the temperature and extends the drying time
to further enhance drying results and provide a brilliant shine.
* model dependent
Note 1: The Energy Guide label was based on the Normal or Regular soil sensing cycle as follows: The
unit was tested without any Rinse Aid (liquid) in the Rinse Aid chamber. A single dose of detergent was
inserted into the Detergent Dispenser, with no detergent being used in the prewash. The unit was not
subjected to truncated testing per the definitions in the test procedure. We recommend that dish loads
such as the one in the energy certification test have the rack position set in the highest position.
Loading ...
Loading ...
Loading ...