Loading ...
Loading ...
Loading ...
10
Rack Features
Flip Tines
The racks consist of tines that can be folded down
depending on what you may need to load in the rack.
To fold down, grasp the folding tine and release from
notch. Push folding tine downward to desired posi-
tion as shown in Figure 1.
Manual Adjustable Upper Rack (model dependent)
Remove the empty upper rack
by pulling it out of the dish-
washer until it can be lifted
upward as show in Figure 2.
Pull the rack up and out until
the rollers are completely free
of the roller guides.
Reinsert the rack with the other
set of rollers on the roller
guides as shown in
Figure 3
.
RackMatic® (model dependent)
The height of the upper rack can be adjusted in 3 steps to create more
space. Before lowering or raising, ensure the rack is completely empty.
1 Pull the top rack out of the dishwasher until
it stops.
2 To lower the rack, push the lever inward.
3 To raise the rack, hold the basket on the sides
of the upper rack and lift up.
Note: Before pushing the top rack into the dish-
washer, ensure the rack height is the same on both
sides. If the height is not the same on both sides,
the dishwasher door will not shut and the top rack spray arm will not connect
to the water inlet.
Knife Rack
The knife rack fits into the upper rack
and is used for loading additional
small items and cutlery.
Cup Shelves
The shelf and the space underneath can
be used for small cups or for larger serv-
ing utensils.
Figure 1
Figure 2
Figure 3
Figure 4
&/,&.
Figure 5
Loading ...
Loading ...
Loading ...