Loading ...
Loading ...
Loading ...
GUANGDONG DOROSIN ELECTRICAL
APPLIANCE CO., LTD.
13
5 OPERATING INSTRUCTIONS
1. When the substrate is powered on for the first time, the substrate enters the standby state,
press the power button to enter the running state, and the first power-on and start-up operation
is continuous dehumidification, the motor runs at low speed, the continuous dehumidification
indicator lights, if it is turned on again after the power is off, Humidity setting before memory
shutdown.
2. Press the humidity mode button, the humidity can be switched between 70% 60% 50% 40%
continuous dehumidification, the corresponding indicator light is on, if the set humidity is greater
than the current ambient humidity +5%, the machine will stop working after 5 seconds. When the
set humidity is lower than the current ambient temperature, the machine will work normally.
5.1 DEHUMIDIFYING RUNNING
1. When the compressor has passed the protection for 3 minutes and the indoor humidity ≥ set
humidity + 5% RH, the compressor will work again.
Loading ...
Loading ...
Loading ...