Loading ...
Loading ...
Loading ...
Faults and what to do about them. en
35
3 Faults and what to do
about them.
Faults and what to do about them.
Emergency release
e.g. in the event of a power cut
The programme will continue running
when the power supply has been
restored.
However, if the laundry has to be
removed, the washing machine door
can be opened as follows:
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with detergent
solution and laundry.
If possible, leave it to cool down.
:Warning
Risk of injury!
You may injure your hands if you reach
into the drum while it is turning.
Do not reach into the drum when it is
turning.
Wait until the drum has stopped turning.
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the washing machine door
if water can be seen through the glass.
1. Switch off the appliance. Disconnect
the mains plug.
2. Drain the detergent solution
.
3. Pull the emergency release
downwards with a tool and release.
The washing machine door can then
be opened.
Information on the display panel
Display Cause/remedy
è is lit up ■ The temperature is too high. Wait until the temperature drops.
■ The water level is too high. It is not possible to add laundry. Close the door
immediately if necessary. Press the A button to continue the program.
è flashes ■ Laundry may be trapped. Open and close the door again and press the A
button.
■ If necessary, push the door closed or remove the trapped laundry and then
push it closed again.
■ If necessary, switch the appliance off and then on again; set a programme and
apply the settings you require; start the programme.
r is lit up ■ Turn on the cold water tap fully.
■ The supply hose is kinked/jammed. Correct the position of the hose.
■ The water pressure is too low. Clean the filter. ~ Page 34
E The childproof lock is activated – deactivate it.
Loading ...
Loading ...
Loading ...