SBM 50 User Manual

Loading ...

Table 3

For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Guidance and manufacturer’s declaration – electromagnetic immunity

TheSBM50isintendedforuseintheelectromagneticenvironmentspeciﬁedbelow.ThecustomerortheuseroftheSBM50should

assure that it is used in such an environment.

IMMUNITY

test

IEC 60601

test level

Compliance

level

Electromagnetic environment – guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 V

rms

150 kHz to

80 MHz

3 V/m

80 MHz to

2.5 GHz

3 V

rms

3 V/ m

Portable and mobile RF communications equipment should be used no closer to any part

of the SBM 50, including cables, than the recommended separation distance calculated

from the equation applicable to the frequency of the transmitter.

Recommended separation distance:

d = 1.2

d = 1.2 80 MHz to 800 MHz

d = 2.3

800 MHz to 2.5 GHz

Where Pisthemaximumoutputpowerratingofthetransmitterinwatts(W)accordingtothe

transmitter manufacturer and d is the recommended separation distance in meters (m).

FieldstrengthsfromﬁxedRFtransmitters,asdeterminedbyanelectromagneticsitesurvey,

should be less than the compliance level in each frequency range.

Interference may occur in the vicinity of equipment marked with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2Theseguidelinesmaynotapplyinallsituations.Electromagneticpropagationisaectedbyabsorptionandreﬂectionfrom

structures, objects and people.

Loading ...

User Manual - Page 76