Loading ...
Loading ...
Loading ...
English 51
Troubleshooting
Information codes
If the dryer fails to operate, you may see an information code on the display. Check the
table below and try the suggestions.
Information code Meaning Action
tC Air temperature sensor issue
Clean the lint lter and/or heat
exchanger. If this continues, call for
service.
tC5
Compressor temperature
sensor issue
Wait 2-3 minutes. Turn the power on
and restart.
dC
Running the dryer with door
open
Close the door and restart.
If this continues, call for service.
HC Compressor overheat Call for service.
5C
Water tank full
Drain pump is out of order
Empty the water tank, turn the
power on, and restart. If this
continues, call for service.
AC6
Check communications
between the main and the
inverter PBAs.
• Depending on the state, the dryer
may automatically returns to
normal operation.
• Turn the dryer off and turn it on
again. Then, restart the cycle.
• If the information code continues
to appear, call for service.
3C Check the motor for operation.
• Try restarting the cycle.
• If the information code continues
to appear, call for service.
FIL+tEr (Buzzer
rings)
Heat exchanger needs to be
cleaned
Clean the heat exchanger.
For any codes not listed above, or if the information code continues to appear, call for
service.
Untitled-33 51 7/30/2019 6:56:15 PM
Loading ...
Loading ...
Loading ...