Loading ...
Loading ...
Loading ...
8. While another person holds the Console (5) near
the Console Bracket (4), connect the wire harness
on the Console to the Upper Wire Harness (48).
Insert the excess wire harness into the Upright (3).
Next, attach the Console to the Console Bracket
with four M4 x 16mm Round Head Screws (101).
Be careful to avoid pinching the wire harness.
8
7. The Console (5) requires four 1.5V “D” batteries
(not included); alkaline batteries are recommended.
IMPORTANT: If the elliptical exerciser has been
exposed to cold temperatures, allow it to warm
to room temperature before inserting batteries
into the Console. If you do not do this, the con-
sole displays or other electronic components
may become damaged. Press the two tabs on the
battery cover, and remove the battery cover. Next,
insert four batteries into the Console. Make sure
that the batteries are oriented as shown by the
diagrams inside of the battery compartments.
Then, reattach the battery cover to the Console.
48
5
3
101
101
8
4
Battery
Cover
Batteries
Tabs
7
5
Wire
Harness
Loading ...
Loading ...
Loading ...