Loading ...
Loading ...
Loading ...
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
cycle, see the Brewing Coffee Later section.
To check the programmed time, push the SET DELAY button.
The display will show the time you have programmed the
coffee to brew. If you press the SET DELAY button again or
wait a few seconds, the display will switch back.
PREPARING FOR USE
Selecting and Measuring Ground Coffee
For best results, use a level tablespoon for ground coffee
measurement. Make sure you use medium grind coffee for a
perfect brew.
A. Suggested Coffee Measurement Chart
10
11
SETTING THE CLOCK AND
DELAY BREW TIME
To Set the Clock:
1. Plug the power cord into a
standard electrical outlet. The
clock will flash on the control
panel to indicate that the time has
not been set yet.
2. Press and hold the HOUR and
MINUTE buttons until you reach
the current time. The AM or PM
indicator is at the left of the
display (Figures 1 and 2).
The clock is now set!
NOTE: Pressing any button before
setting the clock will cause the clock
to start keeping time from 12:00 a.m.
You must set the clock if you want to
use the Delay Brew feature.
To Set the Delay Brew Time:
While the display is in the clock
mode, simply press the SET DELAY
button (Figure 3) and, while the
DELAY BREW yellow light is flashing,
set the brew time by pressing the
HOUR and MINUTE buttons (Figure 4).
The AM or PM indicator is at the left
of the clock display. Within a few
seconds the display will change
to the current time.
The Delay Brew Time is now set!
NOTE: To activate the DELAY BREW
To Brew Ground Coffee
12 Cups 9 tbsp.
10 Cups 7.5 tbsp.
8 Cups 6.5 tbsp.
6 Cups 4.5 tbsp.
4 Cups 3 tbsp.
1 level tablespoon (tbps) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of brewed coffee
Use more or less coffee to suit your taste.
BVMC-JWX12CUP_15ESM1.qxd:133834 1/28/15 2:35 PM Page 10
Loading ...
Loading ...
Loading ...