Loading ...
Loading ...
Loading ...
9
Before using your washing machine for the
first time
Preparing your
washing machine
Attention
The washing machine must have been installed and
connected properly (refer to page 34).
² The washing machine was tested before leaving the
factory. To remove any water left over from testing
procedures, the first washing cycle should be
carried out without laundry in the machine.
■ Turn the tap on.
■ Pull out the detergent drawer all the way.
■ Pour approx. 1 litre of water into chamber II of the
detergent dispenser.
■ Half fill the measuring beaker with detergent and
pour into chamber II.
² Do not use any special detergents for delicates or
woollens (excessive foam).
■ Close the detergent drawer.
■ Close the washing machine door.
■ Set the programme selector to Cotton 90°C T
Prewash.
“ready/wash’’ indicator light flashes.
■ Press the Start Soaking A button. “ready/wash”
and “Start Soaking” indicator light are on.
The programme starts.
■ The programme is ended if “spin/end” indicator
light flashes.
Turn the programme selector to Off.
Loading ...
Loading ...
Loading ...