Loading ...
Loading ...
Loading ...
30
Programme does not start.
The “ready/wash” and “rinse”
indicator lights flash.
Loading door not closed properly. Check whether laundry is trapped in
door.
Close the loading door (a click
should be heard).
Start Soaking A button not
pressed.
Press the Start Soaking A
button.
Water does not enter the machine
or detergent is not washed away.
The “ready/wash” and “spin/end”
indicator lights flash.
Tap not turned on. Turn the tap on.
Inlet hose kinked or pinched.
Filter blocked in water inlet hose. Clean the strainer; see from page
27.
Detergent in chamber I is not
washed away.
A programme without Prewash
was selected.
Select programme Cotton 90°C
T Prewash
.
Water not visible in the drum. Not a fault.
The water lies below the visible part of the drum.
Washing solution is not completely
drained.The “
rinse” and “spin/end”
indicator lights flash.
Pumped blocked by foreign objects. Clean the pump (refer to page 26).
Fluff-producing laundry was
washed. The water drainage pipe or
drain hose is blocked.
Clean drainage pipe and/or
drainage hose.
Water runs out from under the
appliance.
Screw fitting of the inlet hose is
leaking.
Tighten the screw-fitting.
Drainage hose is leaking. Replace the drain hose.
Foam comes out of the detergent
drawer.
Too much detergent or detergent
not suitable for use in washing
machines used.
Mix 1 tablespoon of fabric softener
with
½ litre of water and pour into
chamber II of the detergent
dispenser.
Reduce detergent dosage for next
wash cycle or use detergent which
is suitable for use in washing
machines.
Fault Cause Remedial action
Loading ...
Loading ...
Loading ...