Loading ...
Loading ...
Loading ...
42
Enjoying 3D Image Viewing
Attaching the Nose Pad
Attach either of the supplied nose pads as needed
(such as when the glasses do not fi t properly). The
glasses come with a large and small nose pad.
Attaching the nose pad
2
1
1
Removing the nose pad
Attaching the 3D Glasses Band
Attach the supplied 3D Glasses band strap as needed
(such as when the glasses do not fi t properly).
Insert the ends of the 3D Glasses into the 3D Glasses
band until they are secure.
Pull the cord stopper on the strap to adjust the strap
length.
•
Before Using the 3D Glasses
Before using the 3D Glasses for the fi rst time, remove
the insulating sheet attached to them.
Replacing the Battery
The battery has an expected service life of
approximately 75 hours.
• When the battery power is low, the LED light blinks 6 times
after the power is turned on.
• When replacing the button cell, use only the designated
battery (Hitachi Maxell: CR2032 lithium button cell).
1
Loosen the screw used to secure the battery cover.
2
Remove the battery cover.
3
Place the tip of the slotted precision screwdriver into the
opening between the battery and the socket.
4
Lift up the battery while taking care not to get the
screwdriver caught on the metal latch.
5
When the battery comes loose from the socket, pick it out
with your fi ngers.
6
Hook a new battery to the metal latch and insert it into the
socket.
7
Close the battery cover.
8
Insert the screw to secure the battery cover.
2
8
6
1
7
5
4
3
• Take care not to reverse the battery poles (+ and –) when
loading the battery.
• Used batteries should be disposed of strictly in accordance
with the applicable local laws and regulations.
LC-5260LE925UNE04.indd42LC-5260LE925UNE04.indd42 2010/07/2614:34:382010/07/2614:34:38
Loading ...
Loading ...
Loading ...