Loading ...
Loading ...
Loading ...
18_installation & maintenance
WATER SUPPLY CONNECTOR FILTER
1. Pull out the fi lter and wash well.
2. Pull in the fi lter and connect the hose to the inlet water valve
tightly.
3. Check if there is a leakage.
Note to tighten up the connector.
CLEANING THE FILTER
Clean the filter net often to keep the washer clean.
1. Push the upper part of the Hygiene fi lter
and pull in.
2. Open the cover as shown in the fi gure.
3. Clean the Hygiene fi lter. 4. Close the cover and insert the lower part of
the fi lter in the basket fi rst and then push
the fi lter with “click” sound.
CLEANING THE PUMP FILTER (OPTION)
1. Place a rag or towel under the wash fi lter to avoid wetting the fl oor, and rotate the fi lter counterclockwise
and pull it out.
2. Remove any dirt from the fi lter.
3. Return the fi lter to its place by rotating the fi lter clockwise until it locks into position.
installation & maintenance
32
1
F500-03273L-03_EN.indd Sec6:18F500-03273L-03_EN.indd Sec6:18 6/21/2016 5:26:49 PM6/21/2016 5:26:49 PM
Loading ...
Loading ...
Loading ...