Loading ...
Loading ...
Loading ...
BLACK
BLUE
WHITE
GREEN
Outlet Box
3
3. Wrap electrical tape (not included) around each wire
connector (AA) and make sure no bare wire or wire
strands are visible after making connections.
Note: Flushmount installation will not use the downrod assembly (D) or canopy cover (C) as shown.
FINAL INSTRUCTIONS
11
Lowes.com/harborbreeze
1. Loosen (but do not remove) the two preassembled
mounting screws on mounting bracket (A) that align
with the slotted holes on canopy (B). Remove the other
two mounting screws.
Lift canopy (B) up so slotted holes engage loosened
screw heads on mounting bracket (A), then twist canopy
(B) clockwise. Re-install previously removed mounting
screws, then tighten all screws securely.
2. Position one blade iron (F) under blade (G). Insert three
blade screws (BB) through blade (G) and into blade iron
(F). Tighten each blade screw (BB) evenly, starting with
the center blade screw (BB). Repeat for the remaining
blade assemblies.
Note: If the canopy cover (C) is loosened during installation,
press it to the inner edge of the canopy (B).
WIRING INSTRUCTIONS
2
BB
G
F
x 15
BB
Blade Screw
Hardware Used
Then, turn wires upward and carefully push them into
the outlet box; make sure the WHITE and GREEN
connections are on one side and the BLACK connections
are on the other side.
1
Screw
B
B
C
Loading ...
Loading ...
Loading ...