Loading ...
Loading ...
Loading ...
Open the trunk.
Remove the holding clips from the
lining by using a flat-tipped
screwdriver.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Test the new bulb to make sure it
works.
Set the lining back.
2.
1.
4.
3.
5.
6.
Replacing Rear Turn Signal Light
Bulbs
Lights
Maintenance
217
HOLDING CLIPS
BULB
SOCKET
06/08/08 14:51:23 31SDR620_222
Main Menu
Table of Contents
s
t
Main Menu
▲
▼
Main Menu
▲
▼
Table of Contents
Loading ...
Loading ...
Loading ...