Loading ...
Loading ...
Loading ...
−
−
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars or
icons.
Use the TUNE bar or
knob to tune the radio to a desired
frequency. Press the side of the
bar or turn the knob to the right to
tune to a higher frequency, and the
side or turn the knob to the left
to tune to a lower frequency.
The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the or side of the
bar, then release it.XM satellite radio information is
available on page .
The audio system for your vehicle
can also be operated using the voice
control system. See Navigation
section in your Quick Start Guide for
an overview of this system and the
Navigation System manual for
complete details.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
PWR/VOL knob or the AM/FM
button. Adjust the volume by turning
the PWR/VOL knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction in
AM is not available.
Pushing the AUDIO button will also
turn on the system.
137
On vehicles with navigation system
Only on models equipped with
navigation system
CONTINUED
To Select a Station
TUNE
SEEK
To Play the RadioVoice Control System
Playing the AM/FM Radio
Features
119
06/08/08 14:36:16 31SDR620_124
Main Menu
Table of Contents
s
t
Main Menu
▲
▼
Main Menu
▲
▼
Table of Contents
Loading ...
Loading ...
Loading ...