Loading ...
Loading ...
Loading ...
Cleaning and servicing en
39
6. repeatedly until the required level
has been selected.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 (LED
A and LED B →Page17).
7. Press to save the setting.
a The LEDs go out.
8. Close the appliance door.
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
▶
Never use detergents containing
chlorine.
1. Remove any coarse soiling in the
interior with a damp cloth.
2. Add detergent to the detergent dis-
penser.
3. Select the programme with the
highest temperature.
→"Programmes", Page19
4. Start the programme without table-
ware. →Page36
Self-cleaning interior
1
To remove deposits, the appliance
self-cleans the interior at regular inter-
vals.
The programme sequence is auto-
matically adjusted for self-cleaning,
e.g. the cleaning temperature is
briefly increased. Consumption val-
ues, e.g. water and electricity, may
also increase.
If the interior is no longer self-cleaned
adequately and deposits occur, see
this information:
→"Cleaning the tub", Page39.
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→"Safe use", Page11
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action Benefit
Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.
This ensures the parts
of the appliance will
remain clean and hy-
gienic.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
This will prevent un-
pleasant odours.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...