Loading ...
Loading ...
Loading ...
49-1000110 Rev. 0 9
Installation Instructions
INSTALLATION INSTRUCTIONS
LEFT/RIGHT DOOR OPENING METHOD
This product allows you to reverse the door opening
from left to right and back. You can select your
preference of door opening by following the procedure
to make the change.
Tools Required
Phillips and Flat Head Screwdrivers, Ratchet Wrench
with 8 mm and 10 mm sockets.
Dismantling
$IIL[UHIULJHUDWRUDQGIUHH]HUGRRUE\VWLFNLQJ
adhesive tape on both sides to hold doors in place.
2. Remove the upper hinge cover by using flat head
screwdriver. Then remove three screws using ratchet
wrench with 10 mm head. Take out hinge by pulling
it vertically and keep it in safe place. Remove the top
hinge plug from the opposite side of the cabinet top.
5HPRYHWKHDGKHVLYHWDSHRQIUHH]HUGRRUOLIWLWDQG
take off the door and carefully put it aside.
4. Remove two screws of middle hinge using ratchet
wrench with 8 mm socket, and keep them in a safe
place.
5. Remove the adhesive tape on refrigerator door, lift it
and take refrigerator door, and carefully put it aside.
6. Remove the doorstoppers from the refrigerator and
IUHH]HUGRRUV
7. Insert left side doorstoppers (provided in your
packing) on the left side bottom hole of the
refrigerator door and on the left side bottom hole of
WKHIUHH]HUGRRU)DVWHQZLWKVFUHZVSURYLGHG
REVERSING THE DOOR SWING
WARNING
Follow all steps when reversing the door swing. Failure to follow these instructions, leaving off
parts, or overtightening screws, can lead to the door falling off and result in injury and property damage.
Loading ...
Loading ...
Loading ...